Description
Shure MV7i Smart Microphone and Interface: a dynamic microphone.
Highlights include built-in XLR & 1/4" interface, optimized frequency response, highly directional dynamic element, advanced DSP features and dual-display LED.
Key specifications: polar pattern Unidirectional (cardioid); frequency response 50 Hz to 16,000 Hz; connector type USB-C port; iOS iOS 16 and higher (USB-C devices only); android Android 12 and higher.
A dynamic microphone handles loud sources and rejects room noise, which suits podcasting, streaming and live vocals.
The price includes GST and shipping is free Australia-wide; the dispatch time is shown above the add-to-cart button.
Specifications
| System requirements | |
|---|---|
| Windows | Windows 10 and higher, minimum 8 GB of RAM, 20% or more hard disk space. |
| Macintosh | MacOS 12 and higher, 8 GB of RAM, 20% or more hard disk space. |
| iOS | iOS 16 and higher (USB-C devices only) |
| Android | Android 12 and higher |
| MFi Certified | Yes |
| Microphone | |
| Type | Dynamic (moving coil) |
| Polar Pattern | Unidirectional (cardioid) |
| Frequency Response | 50 Hz to 16,000 Hz |
| Maximum SPL | 128 dB SPL |
| Sensitivity at Minimum Gain | -33 dBFS/Pa at 1 kHz (1 Pa = 94 dB SPL) |
| Adjustable Gain Range | 0 to +36 dB |
| Digital Noise Floor (20 Hz to 20kHz, A-weighted) | -118dBFS (with Auto Level Mode and Real Time Denoiser enabled) |
| Input | |
| Supported Types | XLR, 1/4" TS, 1/4" TRS |
| Input Impedance (XLR) | 5.8kΩ |
| Input Impedance (1/4") | 1MΩ |
| Adjustable Gain Range | 0 to +60 dB 0 to +40 dB (stereo mode) |
| Maximum Input Level | XLR: -14dBV 1/4": 7dBV |
| Digital Noise Floor (20 Hz to 20kHz, A-weighted) | XLR: -118dBFS (with Auto Level Mode and Real Time Denoiser enabled) 1/4": -97dBFS (@10dB gain) |
| Phantom Power | Yes (+48VDC) |
| System | |
| On-Board DSP | Auto Level Mode with SmartGate, Digital Popper Stopper, Real-time Denoiser, Tone Slider, Reverb, Compressor, Limiter, High-Pass Filter |
| USB Host Requirements | USB Audio Class 2 (UAC2), Powered through USB Bus Power (USB 2.0 or higher) |
| A/D Converter | 24-bit, 48kHz (16-bit, 44.1kHz support for iOS) |
| Headphone Output | 3.5 mm (1/8") |
| Connector Type | USB-C port |
| Stand Mount Type | 5/8"-27 thread mount |
| Housing | Diecast aluminum |
| Net Weight | 567g (1.25 lbs) |
| Dimensions | Microphone Length: 169.5mm Microphone Diameter: 90mm (in yoke, incl. knurled knobs) Mic in Yoke: 164mm H x 207mm L x 90mm D (H = mic and yoke assembly 90-degrees to one another, measured from table to top of the mic) |
| Accessory Cable | Includes one (1) 3m USB-C to USB-C cable |
| Software Compatibility | MOTIV Mix™ Desktop App, MOTIV Audio iOS & Android Apps |
Product details
| Polar Pattern | Unidirectional |
|---|---|
| Element Type | Dynamic |
In the box
- Shure MV7i Smart Microphone and Interface
Reviews
There are no reviews yet.